Home > News > Content

Clutch Bearings Are Important Parts Of The Car

Clutch bearing is a bearing bearing (commonly known as clutch ball plate), its role is to depress the clutch pedal to withstand the spring thrust plate or drive plate to move the clutch shell direction, that is to say when the clutch pedal Move the lever to overcome the platen spring thrust to complete the clutch separation work.

Clutch bearings are a more important part of the car, if the maintenance is not good failure, Chinese Clutch Release Bearing not only will cause economic losses, and disassembly a very troublesome, need to spend a lot of hours. Therefore, to clarify the reasons for the failure of the clutch bearing, Chinese Clutch Release Bearing and in the use of reasonable maintenance and maintenance, to extend the life of the separation of bearings, improve labor productivity, and achieved good economic benefits are of great significance. Relevant standards refer to "JB / T5312-2001 automotive clutch bearings and their units".

The clutch bearing is mounted between the clutch and the transmission, the release bearing is loosely fitted on the tubular extension of the first shaft bearing cap of the transmission, and the shoulder of the release bearing is always abutted against the separation fork by the return spring and retracted to the final position, Chinese Clutch Release Bearing And the separation of the end of the lever (separation means) to maintain a gap of about 3 ~ 4mm.

As the clutch pressure plate, the separation lever and the engine crankshaft synchronous operation, and the separation fork can only move along the clutch output shaft, directly with the separation fork to pull the separation lever is clearly not through the separation of bearings can make the separation of the side of the lever The clutch output shaft moves axially to ensure that the clutch is able to engage smoothly, separates soft, Chinese Clutch Release Bearing reduces wear and extends the life of the clutch and the entire drive train.