Home > News > Content

Clutch Discs Are Like Brake Pads On Wheels

Clutch disc on the friction plate, like the brake on the wheel, is very wearable asbestos and copper wire, the disc friction plate also has the lowest allowable thickness, driving mileage long after the pressure plate on the friction plate to be replaced. The original friction piece replacement is can buy spare parts of their own replacement, is now bought has installed a good friction plate assembly, do not have to change the friction piece, directly change the clutch plate can be. In order to reduce the loss of the clutch, so there is the right way to use the clutch pedal. Just don't step on the clutch pedal. The clutch piece is in a half clutch state, which means that the Frisbee and the disc are in a state of friction. If the clutch pedal is completely stamped, Clutch Disc the flywheel and clutch disk are completely cut, and there is no friction between them. If the clutch pedal is fully lifted, the flywheel and clutch disc are fully integrated, although there is friction, but there is no friction basically. Clutch Disc So the clutch pedal is not half the state.

Clutch Disc Working principle:

Clutch shell, (if it is a two-piece clutch) including the middle plate, installed in the flywheel back end of the plunger, under the action of the spring (at one end is the clutch plate, Clutch Disc the other end of the spring is the clutch shell) so that the plate and friction plate combination, the engine power transmission to the gearbox.

Clutch disc on the friction plate, like the brake on the wheel, is very wearable asbestos and copper wire, the disc friction plate also has the lowest allowable thickness, driving mileage long after the pressure plate on the friction plate to be replaced. The original friction piece replacement is can buy spare parts of their own replacement, is now bought has installed a good friction plate assembly, do not have to change the friction piece, directly change the clutch plate can be. In order to reduce the loss of the clutch, so there is the right way to use the clutch pedal. Just don't step on the clutch pedal.

Clutch DISC BRAKE

Widely used is the spring-pressed friction clutch (referred to as friction clutch). The torque of the engine is transmitted to the driven disk through the frictional action of the flywheel and the pressure plate to the contact surface of the driven disk. Clutch Disc When the driver step on the clutch pedal, Clutch Disc through the transmission of the machine, so that the diaphragm spring big end drive the pressure plate back, at this time from the moving part and the active part of the separation.